Lightkiwi Motion Sensor for Modular LED Under Cabinet Lighting is a simple to use motion sensor. Just simply connect Lightkiwi Motion Sensor between power supply and Lightkiwi Modular LED Under Cabinet Lighting to add motion sensor feature. If an object moves, the motion sensor switches the light on, and automatically turns the light off after 25 seconds (approximately). The light will stay on as long as motion is detected.
- Motion turns on lights instantly, when you can't
- Perfect for the basement, attic, or dark places.
Lightkiwi Motion Sensor is designed to work in a dark environment. Therefore, motion sensor would not detect any motion during daytime or bright environment.
If you wish to have Lightkiwi Motion Sensor to detect motion during daytime or bright environment, you would need to block the light sensor (located right next to plastic cover in the middle) with sticker.
*Do Not Use Transparent Sticker*
Combine motion sensor and dimmer switch to set the brightness with dimmer switch and control the power with motion sensor.
|Dimensions||(d) 1.89 inch / 48 mm x 0.47 inch / 12 mm|
|Input Voltage||DC12V or DC24V|
|Load Rating||24W(12V) / 36W(24V)|
|Detection Distance||6.56 ft / 2 meter|
|Detection Range||120 Degree|
|Delay Time||25 seconds|
|Length of Cables||6.16 ft (3.08 ft Male+ 3.08 ft Female)|
|Operating Temperature||-20 Degree C to 40 Degree C - Indoors|
Note: Motion Sensor (PIR) [Item#: G3635] is designed for Lightkiwi Modular LED Under Cabinet Lighting System. If the unit is used for other products, it may not function properly.