Hardwire Kit, Direct Wire for LED Under Cabinet Lighting - 96 Watt

Model : E3848



Availability: In Stock

Quick Overview

  • Maximum Wattage: 96 Watt
  • Input Voltage: AC 120V
  • Output Voltage: DC 24V
  • Kit for modular LED under cabinet lighting.
  • Allows you to use a wall dimmer switch (120V).

Lightkiwi Hardwire Kit provides all the components which you would need to do hardwire installation with Lightkiwi(R) Modular Under Cabinet Lighting Panel(s). The purpose of this kit is to enable the usability of a wall dimmer switch to control the Lightkiwi Modular Under Cabinet Lighting Panel(s) since the standard transformer wouldn't be compatible with the wall dimmer switch.


Compatible Lighting


What's Included


[Lightkiwi 96 Watt Dimmable Transformer (24VDC)]

Use Lightkiwi 96 Watt Dimmable Transformer (24VDC) to hard wire and dim your LED under cabinet lighting with an LED wall dimmer switch. It is the most compact LED driver on the market with a magnetic transformer core. It is equipped with one push-to-reset circuit breaker on the output, which protects both the load and driver. The driver is encased in a coated metal box that includes 2 knock-outs on the bottom to enable easy installation that complies with electrical code requirements.

  • Transformer¬†- Input leads are 20 AWG. Output leads are 16 AWG. Lead insulation is 105 Degree C. The transformer uses a class B 130 Degree C insulation system.
  • Enclosure¬†- Enclosure temperature will not exceed 70 Degree C @ 40 Degree C ambient. The wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors. The removable cover for the wiring compartment is secured in place by a screw. The enclosure is black power coated.


  • Low operating temperature
  • Acoustic humming and buzzing free
  • Push-to-reset circuit breaker on the output
  • Works with low-voltage TRIAC dimmers
  • 2 bottom knockouts
  • ETL listed
  • CSA listed
  • UL standard 8750
  • UL standard 5085-1


[6ft Interconnect Cable (One End with Bare Wire)]

Unlike, the standard 6ft Interconnect Cable comes with both ends with DC connector, the 6ft Interconnect Cable in this kit has one end with bare wire to connect to dimmable transformer. Once you install the interconnect cable to the dimmable transformer, it enables easy connection as plug an play to install rest of the lightings.


Support Files:

Installation Guide

Wall Dimmer Switch
Compatibility List

Modular LED
Under Cabinet Lighting
Power Requirement Chart


If there is no power from the output, please change the polarity of the installed interconnect cable as shown in the link below.



The Quality You Can Trust
Quality Materials
Long-term Durability
SECURE Shopping
100% SSL Encrypted